Mark 8 Hot Adhesive Gluing Nozzle For Paper Adherence Assembled In Cigarette Makers
Glue Applicator is a component assembled in both cigarette makers and packers, applying glue to different paper materials.
1. Glue Pot Stability
The degree of stability in molten state, the tendency to decompose and char. Important for industrial processing where the adhesive is molten for prolonged periods before deposition.
Bond-formation temperature
Minimum temperature below which sufficient wetting of substrates does not occur
2. Hot Melt Glue
Hot melt glues usually consist of one base material with various additives. The composition is usually formulated to have a glass transition temperature (onset of brittleness) below the lowest service temperature and a suitably high melt temperature as well. The degree of crystallization should be as high as possible but within limits of allowed shrinkage. The melt viscosity and the crystallization rate (and corresponding open time) can be tailored for the application. Faster crystallization rate usually implies higher bond strength. To reach the properties of semicrystalline polymers, amorphous polymers would require molecular weights too high and, therefore, unreasonably high melt viscosity; the use of amorphous polymers in hot melt adhesives is usually only as modifiers. Some polymers can form hydrogen bonds between their chains, forming pseudo-cross-links which strengthen the polymer
3. Pigmented versions
The adhesives are usually clear or translucent, colorless, straw-colored, tan, or amber. Pigmented versions are also made and even versions with glittery sparkles. Materials containing polar groups, aromatic systems, and double and triple bonds tend to appear darker than non-polar fully saturated substances; when a water-clear appearance is desired, suitable polymers and additives, e.g. hydrogenated tackifying resins, have to be used.
Product Tags:
|
|
Mark 8 Hot Adhesive Gluing Nozzle For Paper Adherence Assembled In Cigarette Makers Images
|
